JL流化床對撞式氣流粉碎機
FLOWCHART OF JL FLUIDIZED BED IMPINGING JET MILL PROCESS (AIRFLOW MILL)
JL流化床對撞式氣流粉碎機工藝流程示意圖（氣流磨）
產品性能與優勢/ PERFORMANCE AND MERITS OF THE PRODUCT
●分級采用臥式分級輪，比立式分級輪切割精度更準，分級效率更高。
Horizontal-type stepped gear is adopted for classification, which has more accurate cutting accuracy and higher classification efficiency than vertical stepped gear.
●空氣動力學原理正面，分級輪越大，分級壞點越多，所以該設備采用高速小分級輪，保證了分級的精度，比國內采用大輪低速氣流磨精度提高1倍以上。
The aerodynamic principle proves that the larger the stepped gear is, the more bad points there will be. Therefore, the equipment adopts small high-speed stepped gears to ensure the classification accuracy, which is twice higher than that of large-wheel and low-speed airflow mill in China.
●經過特殊的流場設計和高精度的機械加工，同等產量下，比圓盤式和氣旋式氣流磨能耗降低30%。
Through special flow field design and high-precision machining, the energy consumption is reduced by 30% compared with disk-type and cyclone-type airflow mills at the same output.
●高速顆粒不與粉碎室內壁相撞擊，物料不通過噴嘴，磨損低，產品無污染。
The high-speed particles do not collide with the inner wall of crushing chamber, and the materials do not pass through the nozzle, which lower the wear with no pollution from the product.
●產量系列化：2~5000kg/h：細度高：d97=2~180um。
Production serialization: 2-5,000kg/h: High fineness: d97=2-180um.
●顆粒形狀好，粒度分布范圍狹窄，無大顆粒。
The particle shape is good with a narrow size distribution range; there are no large particles.
●程序控制，進口元器件，人機界面良好，易操作。
Procedure control, imported components, and good man-machine interface, which is convenient for operation.
●無級可調、運行穩定，清掃徹底，便于更換品種。
Stepless adjustable, stable operation, and thorough cleaning, which is convenient for variety replacement.
●適用范圍廣，結構緊湊，噪音小，適合莫氏硬度9.5以下的各種軟硬材料的磨粉。廣泛應用于化工、非金屬礦物、冶金、磨料、陶瓷、耐火材料、醫藥、農藥、食品、保健品、新材料等行業。
It has wide application range, compact structure, and low noise, which is suitable for grinding soft and hard materials with Mohs hardness below 9.5. Widely used in chemical industry, nonmetallic minerals, metallurgy, abrasives, ceramics, refractory materials, medicine, pesticides, food, health care products, new materials and other industries.
氣流磨技術參數/ Technical indicators
施工案例? ? ? ?公司環境
新聞資訊? ? ? ?聯系我們
電話：136 0412 4805
傳真：0412-3214 668
地址：遼寧省鞍山市海城市響堂街道
大盤線紅光工業園區
網址：jinlunmach.com
